Steel Glass Doors

Door Type

Pivot
Hinge
French
Bi-fold
Barn
Cavity Sliding
Stacker Sliding

Glazing Options

Single Glazed –  6mm, 8mm, 10mm tempered safety glass
Double Glazed – 5mm + 9a/12a (Argon filled) + 5mm tempered safety glass

Styles

Clear
Reeded (Fluted)
Grey
Rainstorm
Hammered
Aquatex
Course Linen
Pinhead

Location of Door

Interior
Exterior

Swing of Door

In-swing Left hand
In-swing Right hand
Out-swing Left hand
Out-swing Right hand

Door Design

Customisable

Material

Precision cold formed galvanised steel profiles – ”P Tube” profile design
3.2mm wall thickness tube with foam injected – Very compact profiles with minimal depth and sight-lines

Solid Hot Rolled Swiss Steel W20 & W40 Stepped leg design, material thickness up to 5mm – Very compact profiles with minimal depth and sight-lines
Appropriate for heavy duty corrosion protection

Surface Treatment

Zinc-magnesium pre-coating for corrosion protection
Gritblasting SA 2.5;
The 1st layer is a sealing primer
The 2nd layer is a high-durable top coating;
Total thickness is at least 150-180 microns according to VMRG quality requirements.
Paint: 4FC (Fluorocarbon) (DAIKIN of Japan)

Door Jamb & Frame

P Tube Steel Profile
50mm/75mm/100mm/150mm x 25mm/30mm/40mm/50mm

W20 Swiss Steel Profile
22mm x 32mm, 35mm x 32mm, 41mm x 32mm

W40 Swiss Steel Profile
27mm x 42mm, 39mm x 42mm, 35mm x 42mm

TDL (Mullion bars)

20T/30T

Glazing Beads

CTM20/CTM30

Hinges

Heavy Duty Welded, 180 degree, Lift off with grease nipple

Mounting Type

13mm/8mm – Pre drilled mounting holes inside of jamb, with supplied cover caps. *Note screws for fixing jamb not supplied.
Mounting Tabs Outside of Jamb
Mounting Fins Outside of Jamb

Handles

SEMAR Brass Bodied Lever with Spring Latch
Custom Steel Pulls – Various options

Lock

SEMAR Mortice Lock with key outside, turn snib inside – Matt Black
Single Deadbolt Round or Square with key outside, turn snib inside – Matt Black/Silver
Lockwood Electronic Strike & Mortice Lock – By request

Roller Catch

2 per door set

Flushbolt

2 per door set

Doorsill

30mm inside edge/25mm outside edge as standard

Rubber Drop Seal

10mm

Package

5 Layers of packing, plastic film, soft foam sheet, corrugated paper board, bubble wrap and sealed wooden crate

CAD Shop Drawing

Yes

Note

External Doors and Windows can be supplied glazed or
un-glazed depending on your building surveyor/certifier. Our glass meets Australian Standards.

What are your lead times for custom manufacturing & delivery to site?

Melbourne, Sydney & Canberra, Brisbane: Approx 4-5 months from shop drawing approval date to site.
Adelaide, Perth, Tasmania: Approx 5-5.5 months from shop drawing approval date to site.

Do you have a showroom?

Yes we have a new showroom at 9 Gwynne Street, Cremorne, Victoria which is currently open Monday-Saturday strictly by appointment. Please send an email to admin@zenbg.com.au to book an appointment.

We currently don’t have any other showrooms in other states, but aim to set these up in the future.

What size doors can you make?

Iron Entry Doors

Max size pivot single door frame: Please contact us with your requirements, we use pivot hardware capable of supporting 500kg

Max size hinge single door frame: 3000 x 1500 (no sidelight frames)
Max size hinge double doors frame: 3000 x 3000 (no sidelight frames)

*(We can make any width/height on-top of the above dimensions with the addition of sidelight/highlight windows iron/steel glass/panelling).

What are your standard Door Jamb Sizes?

Iron Doors: 50mm x 150mm-200mm Iron Tube, 12 Gauge Thickness

Do you have standard sizes?

We may have some stock items in our Melbourne warehouse, please contact us at info@zenbg.com.au for current stock. Otherwise all doors are made custom to suit your opening.

What materials do you use to manufacture your doors?

Iron Doors: Galvanised Wrought Iron (Q235), Sand blasted and Zinc Primed Prior to Painting, 2.5mm Iron Sheet on either side of the panel, 45mm Polyurethane Core, 50mm iron tube for panel and frame

How heavy are your doors?

Iron Doors: 72kg/sqm

Are your entry doors fire rated or BAL tested?

No we have not undergone BAL testing for our Iron Entry Doors, but they are manufactured from non-combustible 2.5mm iron sheeting on the inside and outside of the panel. Check with your building surveyor or certifier.

Can Iron Entry Doors be facing the sun and exposed to water?

We don’t recommend installing the iron entry doors in instances where the entrance will face direct sun for most of the day, extreme heat can distort the steel and cause issues with the jamb.

How long have you been in business?

Zen Doors was founded in 2019, but our manufacturing facilities have been manufacturing different types of wrought iron, steel glass hinge, pivot, sliding, bifold doors and windows for over 15 years.

Where are your doors manufactured?

Zen Doors are designed in Melbourne, Australia and manufactured in two large manufacturing facilities in China. Our doors are all custom made by hand and undergo numerous quality checks and tests, we construct and hang every door prior to shipping to test hardware, mechanisms and sizes. All iron and steel glass doors are securely packed and sealed in large wooden boxes and imported Worldwide in large shipping containers.

How can I obtain a quote for a custom design or size not shown on your site?

Please send us an email at admin@zenbg.com.au with the door type, opening size and site address for a custom quote.

Do you offer installation & glazing service?

We can offer door installation in Melbourne. All steel doors/windows with single, or double glazing, low e glazing. All doors with glass have glazing pre installed and is in accordance with Australian Glazing Standards.

How do I install my new Zen Door?

As each installation will have different requirements and quality and safety is paramount, if you’re located in Melbourne we recommend using our installation service. If interstate we recommend using a qualified door carpenter to install your door. Your door will come with all the necessary hardware to install your door into our supplied door frames. View the installation guide on our website for basic instructions.

For Iron Doors there are two methods for installation, iron mounting tabs welded on the side of the iron door jamb or pre drilled mounting holes on the inside of the jamb. Please talk to your builder or installer which method will be best for your circumstances on site.

Your builder or carpenter will ensure proper installation of the jamb and hanging of the door. As both iron and steel glass doors are quite heavy, multiple people will be needed for installation.

My project is interstate, can my builder or carpenter install and arrange the site glazing?

Yes we advise you have your builder or carpenter handle the installation. We recommend also going over the shop drawings we provide with your builder or carpenter to understand the requirements prior to delivery.

What type of finishes do you provide?

We have different finishes for the different door materials. Our iron doors and steel glass doors are fluorocarbon coated.

How do I order?

You can order steel doors or windows by getting in touch with us and obtaining a quote or try our Custom Quote Tool. Once you have made payment we create a CAD shop drawing of your door according to the plans, dimensions and specs you provide us. This shop drawing will need to be reviewed and signed off by you or your builder/carpenter/installer prior to us constructing the door. You can expect to receive the shop drawing within 1-3 days of making payment.

At Zen Doors quality control is paramount, so each door must pass our rigorous quality assurance tests and checks prior to packing and shipment.

What is the warranty on a Zen Door?

All Zen Doors come with our 2 year manufacturers warranty. More information can be found on our Warranty page and Refund and Return Policy page.

If you have any other question please feel free to get in touch about our hinge or pivot doors here.

Shipping to Australia

We design our iron hinge, pivot doors & steel glass doors and windows in Australia and manufacture in two large facilities in China. We ship our doors in sealed wooden boxes via sea freight in large containers.

Road Transport Within Australia

Once your order is available at one of our capital city depots our freight partner will call to arrange a delivery date to deliver your entry door to you via road transport.  Please contact us for a freight estimate based on your location.

Once delivery is arranged with the driver you must be at the address specified between the times allocated or arrange authority to leave the boxes in a safe area. Failure to do so will risk in further carrier charges if the truck has to return to the depot. You will be charged for the second trip.

Cost is calculated by the distance you’re located from one of our capital city depots. The further away you are from the depot the higher the cost will be as our items generally come in large plywood crates and are quite heavy. The delivery driver will only lower the crate to a flat safe location at the front of the site. It is you or your installer/builders responsibility to unpack or move the crate.

Please touch base with us for a price estimate on your delivery location.

Download Warranty

Thank you for your interest in the products and services of Zen Building Group Pty Ltd trading as Zen Doors.

This Limited Warranty applies to physical goods, and only for physical goods, purchased from Zen Doors (the “Physical Goods”) and excludes any installation.

What does this limited warranty cover?

This Limited Warranty covers any defects in material or workmanship of the product that is not fair wear and tear during the Warranty Period. This warranty is given in addition to consumer guarantees and does not exclude them.

During the Warranty Period, Zen Doors will repair or replace, at no charge, products or parts of a product that proves defective because of improper manufacturing of the product, under normal use and maintenance, but excluding fair wear and tear and products that are installed not in accordance with our method of installation guidelines by a proper registered builder.

What will we do to correct problems?

If any Zen Door (or part of them) manufacturing are defective, we will repair or replace the item (or part of them) if it cannot be repaired.

How long does the coverage last?

The Warranty Period for Physical Goods purchased from Zen Doors is 2 years from the date of delivery for any manufacturing defects but excludes damage caused by incorrect installation of the product and fair wear and tear.

A replacement Physical Good or part assumes the remaining warranty of the original Physical Good or 2 years from the date of delivery.

What does this limited warranty not cover?

This Limited Warranty does not cover any problem that is caused by:

conditions, malfunctions or damage not resulting from defects in material or workmanship;

defects as a result of the installation of the product that has not been installed in accordance with our installation guidelines;

damage caused as a result of fair wear and tear;

damage caused to the product that has not been caused by any result of the manufacture of the product;

iron entry door paint finish damage, rust or deformation due to continuous water or direct prolonged sun exposure.

Iron Doors need to be installed into an entrance way which is at least 1-1.5 metres under roof cover as to not be exposed to continuous rain or direct sun. This will help protect the paint finish and integrity of the door panel and jamb. All doors are sandblasted and treated with a zinc-based primer and painted with a high zinc fluorine paint to protect against weather, but the doors are not galvanised. Weather stripping and rubber drop seals are included but the doors are not completely watertight.

Failure to follow the above guidance will void any warranty claims associated with paint finish or frame and door deformation/warping.

What do you have to do?

To obtain warranty service, you must first contact us to determine the problem and the most appropriate solution for you. If you proceed to attempt to rectify the defect yourself without our knowledge or without first notifying us in writing this warranty will be rendered void.

Exceptions to guarantees

Consumer guarantees do not apply if you:
got what you asked for but simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it, misused a product in any way that caused the problem, knew of or were made aware of the faults before you bought the product, asked for a service to be done in a certain way against the advice of the business or were unclear about what you wanted, mistakenly ordered the wrong size after agreeing to the measurements prior or at the time of ordering, caused the damage to the product or otherwise installed the product in contravention of our installation guidelines.
https://www.accc.gov.au/consumers/consumer-rights-guarantees/consumer-guarantees

In order to make a defective warranty claim you must first call us (1300 911 558) and explain the defect and also notify us in writing. We then require an email to be sent to info@zenbg.com.au with your order or invoice number, your full name and address and a detailed description of the defect and any photographs or video’s showing the defect.

Once the above has been reviewed we will either offer a repair or replace all or part of your door.

For information on returns and refunds please see our Refund Policy page.

Important

Zen Doors will not be liable or held responsible for incorrect information provided by you, your builder or any other party in relation to your order which results in the door being the wrong size when delivered or not fitting correctly due to incorrect sizing. We reserve the right that all payments are final and there will be no refunds given on our part due to incorrect information provided to us. Please make sure the measurements and or plans you provide to us reflect the correct and true dimensions for the door frame/door we need to construct.

Once we receive an order or a deposit, we will produce shop drawings based on the chosen door design and dimensions provided by you. The shop drawings will need to be signed off by you or your builder prior to us proceeding to construct the door. Please review the shop drawings carefully prior to signing off.

As per the ACCC guidelines you can ask for a free repair, replacement or refund, but you are not always entitled to one. For example, the consumer guarantees do not apply if you got what you asked for but simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it.

Exceptions to guarantees

Consumer guarantees do not apply if you:
got what you asked for but simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it, misused a product in any way that caused the problem, knew of or were made aware of the faults before you bought the product, asked for a service to be done in a certain way against the advice of the business or were unclear about what you wanted, mistakenly ordered the wrong size after agreeing to the measurements prior or at the time of ordering, caused the damage to the product or otherwise installed the product in contravention of our installation guidelines.
https://www.accc.gov.au/consumers/consumer-rights-guarantees/consumer-guarantees

If you have a minor problem with one of our entry hinge or pivot doors, we will help you rectify or offer a free repair.

If the problem with the hinge or pivot door is minor, you must accept a free repair.

If we fail to give you a free repair within a reasonable time or cannot fix your problem, you can:

get it done elsewhere and pass on the costs to the us
ask for a replacement
ask for a refund
recover compensation for the drop in value below the price paid.
When you have a major problem with one of our hinge or pivot doors, you have the right to ask for your choice of a replacement or refund. Any replaced hinge or pivot door will be exactly the same as the one you purchased. Any replaced hinge or pivot door will have a manufacture and delivery time of approximately 8 weeks.

What is a major problem?

A product or good has a major problem when:

it has a problem that would have stopped someone from buying it if they’d known about it
it is significantly different from the sample or description
it is substantially unfit for its common purpose and can’t easily be fixed within a reasonable time
it doesn’t do what you asked for and can’t easily be fixed within a reasonable time; or
it is unsafe.
If your hinge or pivot door does indeed have a major problem, we will be responsible for paying the shipping costs or collecting the product within a reasonable time of being notified of the problem.

If the product is found not to have a problem, you may be required to pay the transport or inspection costs. An estimate of these costs will be provided to you before the product is collected.

Late or missing refunds (if applicable)

If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at admin@zenbg.com.au or call 1300 911 558.